Current position > Product detail
『U-shaped flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
1. How to read the U-shaped pressure gauge of a wet flowmeter
When using a U-shaped pressure gauge, the first step is to read the scales on both sides. Calculate the difference between the two scales and multiply it by the corresponding coefficient to obtain the pressure slag value. If water is used as the working medium, the coefficient is 101.3KPa/10m; If it is alcohol, the coefficient is 101.3KPa/12.5m. This measurement method is suitable for various scenarios, especially in laboratory and industrial environments. The design principle of the U-shaped pressure gauge is based on the fundamental laws of fluid statics. When two fluids of different densities reach equilibrium in a U-shaped tube, the pressure difference inside the fluid will be reflected by the difference in liquid level height. Specifically, the pressure difference is directly proportional to the difference in liquid level height. Therefore, by measuring the difference in liquid level height, the pressure difference can be calculated. It is worth noting that selecting a suitable liquid as the working medium is crucial for ensuring measurement accuracy. Water and alcohol, due to their different physical properties, will produce different liquid level height differences under the same pressure difference. Therefore, the correct selection of working medium is crucial for obtaining accurate pressure measurement results. In practical applications, U-shaped pressure gauges can not only measure static pressure, but also be used to monitor the fluid flow state in pipelines. By observing the changes in the height of the closed liquid surface, it is possible to determine whether there is abnormal flow in the pipeline, and to take measures to ensure the no
2. What is the unit of CMF
Coriolis mass flowmeter (CMF) does not refer to a single unit, but represents a precise measuring tool - Coriolis mass flowmeter.
. This type of flowmeter has become an innovative choice for measuring fluid mass flow rate due to its direct and accurate characteristics. Its working principle is based on a clever design: using two parallel U-shaped tubes as the main structure, by making the bent parts of these two U-shaped tubes vibrate towards each other, it drives the straight tubes on both sides to vibrate accordingly. When the pipe vibrates synchronously, the fluid is introduced into the pipe and flows forward along the pipe. At this point, the pipe will "force" the fluid to vibrate up and down with it, providing a foundation for measuring posture. The operating mechanism of Coriolis mass flowmeter not only demonstrates the clever application of physical principles, but also reflects a profound understanding of fluid dynamics characteristics. Its design creates a spe