『Converter gas flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
What is an ultrasonic flue gas flowmeter?
Ultrasonic flue gas flowmeter is an instrument specifically used to measure the flow rate of large caliber and large cross-section flue gas.. The principle is generally time difference ultrasound. The general installation method is through type. The specific structure consists of an ultrasonic host, an upstream transducer, a downstream transducer, and a sales assistant model cable. Ultrasonic flue gas flowmeter is different from the general meaning of ultrasonic flowmeter. Generally speaking, ultrasonic flowmeter refers to an instrument used to measure liquid media such as slow-release liquids, sewage, water, etc. If measuring the flow rate of flue gas, an ultrasonic flue gas flowmeter is required.
2. Reasonable suggestions for installing filters in front of flow meters in natural gas pressure regulating stations
Impurities contained in natural gas can hinder the normal operation of flow meters and affect measurement accuracy.
. Therefore, it is necessary to install a filter before the flowmeter. In pressure regulating stations, filters filled with bristles or glass fibers are commonly used. Solid particles brought into the filter by gas collide with the baffle and accumulate at the lower part of the filter. They are regularly discharged through cleaning holes, and residual small solid particles and dust particles in the gas remain on the filter element. The filter material is installed between two metal grids. When cleaning, the upper cover can be removed first, and the filter element can be removed for cleaning or replacement. Under normal working conditions, the pressure loss of gas passing through the filter should be less than 10kPa. If the
3. Performance characteristics of Bitoba flowmeter
◆ Energy saving: Due to the fact that the intelligent probe of the primary measuring element is made of Φ 20mm stainless steel, its cross-sectional area is very small and there is almost no pressure loss in the medium pipeline, which greatly reduces the operating cost. Compared with throttling devices such as orifice plates, it has a significant energy-saving effect.
. It is the 061 energy-saving product recommended by the National Development and Reform Commission. ◆ High temperature and high pressure resistance: The intelligent probe of the primary component is made of 1Cr18Ni9Ti stainless steel (special steel is selected accor
Hot News
Related AD
